Exploring the Power of Innovation: PHA 3DESIGN™ Printing Filament (Cocoa) Brings You a New Sensory Experience that Combines both Smell and Visual Appeal! 🌿🚀

Embrace unparalleled toughness without compromising sustainability with PHA 3DESIGN™ Printing Filament (Cocoa)! We extract cocoa using traditional methods and innovatively incorporate it into PHA 3DESIGN™ filament, offering a new sensory experience that combines both smell and visual appeal.

Advantages

• Innovative Sensory Experience: Traditional extraction of cocoa is innovatively integrated into the consumables, providing a new sensory and visual experience.
• Unique Luster: The raw material is derived from microbial fat PHA, giving the consumables a unique luster.
• Energy Efficiency: Low printing bed temperature, resulting in low energy consumption.
• No Harmful Emissions: No harmful microplastics are released during the printing process.
• Moisture Resistance: The consumables are not easily affected by moisture, and the support structures are easy to peel off.
• Excellent Heat Resistance: Good heat resistance, capable of withstanding high temperatures up to 100°C.
• Environmentally Friendly: Fully bio-based and biodegradable, making it environmentally friendly.

Recommended Printing Parameters:

• Applicable to: PEI textured print bed
• Printing Speed: Up to 600mm/s (recommend 180-200mm/s)
• Nozzle Temperature: 190-220°C (recommend 205°C)
• Bed Temperature: 25-55°C (recommend 25°C)
• Pre-drying Conditions: 65°C for 4-8 hours
• Filament Diameter: 1.75 ± 0.03 mm

Physical Properties:

• Melt Flow Index: 9-15 g/10min
• Moisture and Volatiles: <0.5%
• Melting Point: 168-172°C
• Recommended Maximum Flow Rate: 16mm³/s

Mechanical Properties:

• Tensile Strength: >48 MPa
• Elongation at Break: 4-10%
• Notched Izod Impact Strength (23°C): 3-8 KJ/㎡
• Flexural Strength: 77-81 MPa
• Flexural Modulus: 2400-2700 MPa